Hitachi NP18DSAL 18V Brushless Li-Ion 23g Pin Nailer (Renewed C)

Cordless Nailer
Price $186.95

Warranty Information?

Condition: C
Product Options:
CRecon $186.95 Out Of Stock
Manufacturer Part Number: NP18DSAL

Receive an email alert as soon as this item is avaliable for order

The NP18DSAL Pin Nailer is taking fine finish carpentry to the next level. No longer will you have to worry about hoses and compressor for your 23-gauge pin nailer needs.

It is equipped with a built-in counterweight that virtually eliminates all recoil, while reducing the force needed to actuate the tool. It also features a no-push work contact safety tip that reduces marring to provide a clean finish. Additional features include tool-less depth of drive adjustment, dry-fire lockout, on-tool battery indicator, belt hook, soft grip handle, and tool body rubber bumpers. The NP18DSAL is capable of driving approximately 3,000 pins with Metabo HPT's Compact 3.0Ah battery, allowing you to efficiently and comfortably complete any task. This 23-Gauge cordless pin nailer drives pins in lengths of 5/8", 3/4", 1", 1-3/16" and 1-3/8" and can be used to produce nearly invisible holes for a variety of applications including cabinets, paneling, small molding and trim, glazed bead, craft work and picture frame assembly. Covered by Metabo HPT's Lifetime Lithium Ion tool warranty.

  • Built-in counterweight greatly reduces recoil
  • Powered by a Compact 3.0Ah Lithium Ion battery that is 3/4" shorter and .6 lbs lighter than a conventional 3.0Ah battery for complete portability
  • Freedom from cumbersome air hose and compressor saves time in setup, during applications, and in jobsite clean up        
  • Slim nose design allows nailing into the grooves of any trim
  • No-push safety nose tip reduces marring and provides a clean finish
  • Tool-less depth of drive adjustment for flush drives into various materials
  • Quick clear nose with tooled jam release for easy maintenance and reduced downtime
  • High-luminance LED light is handy when working in low light areas
  • Ergonomically formed soft grip handle provides comfort and ensures a secure hold
  • Automatic power shut off after 30 minutes of inactivity, for added safety
  • Dry-fire lockout for assured nail placement and preventing damage to work surface
  • Low battery indicator light allows the user to see battery power status to prevent unexpected downtime
  • Detachable no-mar nose cap protects work surfaces from scratches or indentations
  • Integrated belt hook can be mounted on either side of the nailer to accommodate left or right handed users
  • Straight magazine holds 120 23-gauge pins from 5/8" up to 1-3/8" in length   
  • Capable of driving 3,000 nails per charge using Hitachi's Compact 3.0Ah Li-Ion battery (one battery is included in the kit, additional Compact 3.0Ah Li-Ion batteries sell for only $39.99 or $29.99 for a 1.5Ah Li-Ion battery)
  • Tool body rubber bumpers protect the tool and any surface from damage
  • (2) No-mar nose caps for flat or angle pin driving
  • Compatible with all Hitachi 18V Lithium Ion slide type batteries
  • Lightweight at only 4.4lbs for balance, maneuverability and minimal user fatigue while ideal for overhead and extended use applications
  • Nail Gauge 23-Gauge, Pin Nails
  • Nail Length 5/8", 3/4", 1", 1-13/16", 1-3/8"
  • Magazine Capacity 120
  • Magazine Angle 0 Degree, Straight
  • Battery Type Lithium Ion
  • Battery Amp Hour Compact 3.0Ah
  • No. of Batteries 1
  • Belt Hook Variable Position
  • Depth of Drive Tool-less
  • Driving Speed 2-3 Nails/Sec
  • Nails per Charge Up to 3,000
  • Firing Modes Sequential
  • Battery Charge Indicator Yes
  • LED Light Yes
  • Weight 4.4 lbs
  • (1) Compact 3.0Ah Lithium Ion Battery BSL1830C (339782)
  • Fast Charger (UC18YKSL)
  • Contractor Bag (371108)
  • Safety Glasses (875769)    
  • 3mm Hex. Bar Wrench (943277)
  • No-mar Nose Cap Set (370901)
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Be the first to review this product.