The NV45AB2's "magazine, depth of drive, and bullet proof design are excellent; you could probably drive an 18-wheeler over this tool and it would still work,"
Tools of the Trade Magazine, July/August 2005. The 1-3/4" Roofing Nailer is used for various construction works such as the installation of asphalt roofing shingles and the installation of insulation boards. The NV45AB2 has a side load magazine.
Features
- 5.5lbs, lightweight and well balanced for easy maneuverability
- Side loading magazine, convenient and easy for quick replenishment
- Tool-less depth of drive adjustment, for precision nailing/flush driving
- Carbide tipped push lever, reduces wear
- Rubber pads, help keep nailer from sliding off roof when not in use
- Quick driving, for maximum efficiency
- Pneumatic power feed and return, allows tool to operate in the harshest conditions
- Long-lasting rubber grip, for added comfort
- Available equipped with power pack- NV45AB2H (5.7lbs)
Specifications
| Fastener Diameter Range | 0.120 |
| Magazine Capacity | 120 |
| Magazine Loading | Side |
| Air Inlet | 3/8" |
| Operating Pressure | 70-120psi |
| Jam Clearing | Open-nose |
| Depth Setting | Tool-Less |
| Actuation | Contact, Sequential Optional |
| L x W x H | 9-27/32" x 4-5/8" x 10-3/8" |
| Tool Weight | 5.5 lbs |
| Fastener Type | Coil, Wire Collation |
| Magazine Angle | 16-Degrees |
| Fastener Length Capacity | 7/8" to 1-3/4" |
Includes